The T-specimen has the shape of a plate with a rib as reinforcement and is typical for injection molded parts. Bending the T-specimen using Impetus you can quickly see the behavior of such a part regarding the stiffness and failure. The support has a special design so that the T-specimen can be put on the support, the measurement procedure is the same as for a standard test specimen.

Field of application for solid materials:

  • optional validation of material card
  • optional investigation of failure under tension load

Typical configuration:

  • test specimen geometry: test specimens cut out of the research mold, thickness 2 mm
  • velocity of the pendulum: 1 - 4.4 m/s.